【Overview】 This set includes three compact oval tracks hand-formed from PECO SL-400 flexible track, with approximate curve radii of 85 mm, 65 mm, and 40 mm. Feeder wires are already soldered to each track. Simply place the track on your preferred baseboard and connect the feeder wires to the terminal block on the included PWM power pack. To produce these extremely tight curves, the sleepers (ties) are carefully removed from the flexible track without damaging the rail-chair details. The rails are then gradually shaped with a rail bender, returned to the sleepers, adjusted to the required form, and fitted with feeder wires. The set is suitable for compact narrow-gauge layouts, temporary test tracks, display layouts, and other space-saving applications. ▼ PWM Power Pack The included compact PWM power pack consists of: ・Forward/reverse selector switch ・PWM speed controller ・Battery holder ・Custom wooden mounting plate with four screws A resettable polyfuse is installed for overcurrent and overheating protection. Connect the feeder wires to the terminal block and the track is ready for operation. The compact design is easy to install, carry, and store. The PWM controller itself is also compatible with a 9V PP3/006P battery configuration, although the included battery holder is designed for eight AA batteries. 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

【Overview】 Handcrafted narrow gauge layout base inspired by legendary Japanese layouts. Supports HOn2½ (HOn 2 1/2) / HOn30 / HOe. Includes a smooth manual, hand-cranked turntable with a built-in polarity reversing switch. The turntable is pre-painted/weathered and can be removed easily during scenery work. IMON (ex-Shinohara) Code 60 rails laid to approx. R125 mm with an IMON R150 turnout. The frame is made from beautiful Japanese hinoki (cypress). A compact PWM power unit with polyswitch (short-circuit protection) lets you run trains right away. (AA batteries not included) 【Key Features】 • Compact desktop size: display and operate right on your workbench • Manual turntable: custom unit, pre-painted/weathered, wired with polarity reversing switch • Hinoki frame: elegant grain and premium feel • Built-in PWM controller: speed + direction; quick start (use 8×AA batteries) • One-of-a-kind: carefully hand-built from the base frame up 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

【Overview】 Handcrafted narrow gauge diorama layout base with an original manual turntable. The turntable has a built-in polarity reversing switch for smooth boarding/alighting and can be removed easily during scenery work. Pre-painted and lightly weathered to capture the mood; feel free to add your own finishing. IMON (ex-Shinohara) HOn2½ Code 60 flexible rail and R150 turnout are used; the outer curve is laid to approx. R150 to match the turnout. Architect-supervised light railway-style station and engine shed are included. The frame is made from beautiful Japanese hinoki (cypress). A compact PWM power unit with polyswitch (short-circuit protection) lets you run trains right away. (AA batteries not included) 【Key Features】 • Compact desktop size for display and operation on your workbench • Manual, hand-cranked turntable: custom unit, pre-painted/weathered, wired with polarity reversing switch • Hinoki frame: elegant grain and premium feel • Built-in PWM controller: speed + direction; quick start (use 8×AA batteries) • One-of-a-kind: carefully hand-built from the base frame up 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

【Overview】 Handcrafted narrow gauge diorama layout base with an original manual turntable. The turntable has a built-in polarity reversing switch for smooth boarding/alighting and can be removed easily during scenery work. Pre-painted and lightly weathered to capture the mood; feel free to add your own finishing. IMON (ex-Shinohara) HOn2½ Code 60 flexible rail and R150 turnout are used; the outer curve is laid to approx. R150 to match the turnout. Architect-supervised light railway-style station and engine shed are included. The frame is made from beautiful Japanese hinoki (cypress). A compact PWM power unit with polyswitch (short-circuit protection) lets you run trains right away. (AA batteries not included) 【Key Features】 • Compact desktop size for display and operation on your workbench • Manual, hand-cranked turntable: custom unit, pre-painted/weathered, wired with polarity reversing switch • Station & engine shed: architect-supervised design, basswood construction • Hinoki frame: elegant grain and premium feel • Built-in PWM controller: speed + direction; quick start (use 8×AA batteries) • One-of-a-kind: carefully hand-built from the base frame up 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

【Overview】 Handcrafted HO-narrow diorama layout base with an original manual turntable. The deck has a built-in polarity reversing switch for smooth boarding/alighting and can be removed easily during scenery work. The turntable and rail area are pre-painted/lightly weathered to capture the mood—add your own finishing as you like. PECO OO-9/HOe Code 80 flexible rail and small left turnout are used. The frame is Japanese hinoki (cypress). A compact PWM power unit with polyswitch lets you run right away. (AA batteries not included) 【Key Features】 • Compact desktop size for display and operation • Manual, hand-cranked turntable; pre-painted/weathered; wired with polarity reversing switch • Architect-supervised engine shed (basswood construction) • Hinoki frame with elegant grain • Built-in PWM controller: speed + direction; quick start (use 8×AA) • One-of-a-kind, carefully hand-built piece 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

【Overview】 Handcrafted narrow gauge diorama layout base with an original manual turntable. The turntable has a built-in polarity reversing switch for smooth boarding/alighting and can be removed easily during scenery work. Pre-painted and lightly weathered to capture the mood; feel free to add your own finishing. IMON (ex-Shinohara) HOn2½ Code 60 flexible rail and R150 turnout are used; the outer curve is laid to approx. R150 to match the turnout. Architect-supervised light railway-style station and engine shed are included. The frame is made from beautiful Japanese hinoki (cypress). A compact PWM power unit with polyswitch (short-circuit protection) lets you run trains right away. (AA batteries not included) 【Key Features】 • Compact desktop size for display and operation on your workbench • Manual, hand-cranked turntable: custom unit, pre-painted/weathered, wired with polarity reversing switch • Station & engine shed: architect-supervised design, basswood construction • Hinoki frame: elegant grain and premium feel • Built-in PWM controller: speed + direction; quick start (use 8×AA batteries) • One-of-a-kind: carefully hand-built from the base frame up 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

This compact, handcrafted turntable is fully assembled, painted, and pre-wired—ready to install into your narrow gauge layout with no soldering or electronics knowledge required. Designed and made in Japan, it features smooth manual operation with a built-in gearbox, a long shaft with hand crank, and a factory-installed polarity reversing switch for safe operation after rotation. Simply cut a mounting hole in your layout board, drop the unit in, and connect it to your DC power supply. Perfect for engine sheds, yards, and compact layouts using OO-9, HOe, or other 9mm gauge track. 【Set Contents】 Turntable unit (assembled and painted) Mounting spacers and screws Base with PECO track (pre-wired) Gearbox (pre-assembled) Shaft (approx. 30 cm / 11.8") with manual hand crank Polarity reversing switch (pre-wired) 【Specifications】 Dimensions: Diameter 73mm / 86mm × Height 25mm (2.87" / 3.39" × 0.98") Track: PECO SL-404 Flexible Track (OO-9 / HOe) Material: Resin Operation: Manual rotation (gear-assisted) 【Notes】 This is a handcrafted item — minor variations may occur. Hand-cranked operation only (no motor drive). Designed for DC-powered layouts. No DCC electronics included. No soldering, drilling, or painting required — just install and connect. 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items. AU/NZ: Direct orders temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods.

A professional-grade rail bending tool made in Japan, designed for flex track and drawn rail. This compact and precise bender lets you curve stiff rails—including PECO, Micro Engineering, and others—smoothly and accurately without distortion. With over 10 years of rail bending experience behind its development, this tool creates a lasting rail memory, making your layout curves stable over time. Ideal for compact tabletop layouts using tight radii (like 30mm / 1.18") and essential for building custom turnouts and micro ovals. Compatible with Code 40–148 rails from major brands including PECO, Shinohara, KATO, Micro Engineering, and Atlas. 【Specifications】 Dimensions: 125mm × 100mm × 30.5mm (4.92" × 3.94" × 1.20") Supported rail types: PECO, Shinohara, KATO, Micro Engineering, Atlas, and more Supported rail codes: Code 40 to 148 Minimum bendable radius: Approx. 30mm (1.18") Weight: Lightweight, portable design (exact weight available on request) 【Key Features】 Bends both flex track and stiff drawn rail smoothly Prevents distortion or kinks—perfect for reliable layout building Produces clean, consistent curves for small layouts and dioramas Ideal tool for creating ultra-tight curves, micro ovals, and handmade turnouts Built-in strength for Code 148 down to ultra-fine Code 40 rails 【Notes】 Not recommended for children—precision tool intended for adult hobbyists When bending extremely tight radii, pre-test with spare rails to learn optimal technique Works especially well when paired with our Track Laying Templates (sold separately) 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

A specially designed gauge template set for laying flex track precisely on compact layouts. Simply insert the rails into the slots and slide the template as you fix pins — makes both straight and curved track laying easy and accurate. After hundreds of layout builds, we created what we wished we always had: ✔️ 5 curved templates – R40 / R65 / R85 / R103 / R120   (1.57", 2.56", 3.35", 4.06", 4.72") – each 1/3 circle ✔️ 3 straight templates – 6cm / 12cm / 24cm   (2.36", 4.72", 9.45") Perfectly suited for tight-radius layouts and micro dioramas. Use together with our optional Rail Bender (sold separately) to dramatically expand your layout design possibilities. 【Specifications】 - Gauge: 9mm (HOe / HOn30 / 009 compatible) - Material: MDF (1.5mm thick / 0.06") - Straight templates:   6cm (2.36") / 12cm (4.72") / 24cm (9.45") - Curved templates:   R40 (1.57") / R65 (2.56") / R85 (3.35") / R103 (4.06") / R120 (4.72")   Each curved template forms 1/3 of a full circle 【Notes】 - Made of MDF: keep away from water or high humidity. - Curved templates are radius guides, designed for use after pre-bending the rails. - Forcing them onto unbent rails may cause damage. Auto order email is in Japanese; we’ll send an English confirmation via Messages. 【Taxes & Duties — Summary】 No Japanese Consumption Tax (JCT) charged. Except for direct U.S. shipments, orders are sent DAP (Delivered At Place): import VAT/GST, duties, and clearance/handling fees, where applicable, are paid by the recipient. U.S. orders are sent duties prepaid (DDP) through Zonos. Applicable U.S. import duties and the Zonos postal clearance fee are included in the U.S. shipping charge shown at checkout. No under-declaring / no “gift” marking. Customs documents and invoices show the actual value and contents. For current country notes, please see our Shopping Guide / FAQ. 【Shipping — Summary】 Japan Post EMS with tracking & insurance. Dispatch within 3 business days after payment is captured (weekends/holidays excluded). Shipping charges vary by destination, packed weight, and any destination-specific prepaid duties or processing fees. For multiple items, contact us before checkout for a combined quote (the platform may otherwise add shipping charges per item). Transit times are estimates; loss/damage is covered by EMS insurance. EU: Import VAT, customs duty, and carrier/customs fees may apply on delivery. UK: Orders only if goods value > £135. Email us first. US: Direct EMS shipping available. Duties and the Zonos postal clearance fee are prepaid and included in the U.S. shipping charge. Australia: Direct EMS shipping available only when total goods value per consignment is A$1,000 or less (shipping/insurance excluded). New Zealand: Direct checkout temporarily unavailable. Taiwan: >NT$2,000 → 5% VAT (possible duty). Hong Kong: No VAT/duty for general goods, except specifically dutiable items.

Bundle listing: To avoid duplicate shipping charges, we offer this set as a single listing. Two complete turntable sets in one listing. Ideal if you are building a larger yard, multiple scenes, or want a second unit for another layout, while avoiding duplicate shipping charges on the platform. 【What’s Included】 ･ Manual turntable set x2 (each: assembled, painted, pre-wired, hand crank + polarity reversing switch) 【Best For】 ･ Two engine shed scenes, twin layouts, or a main layout + portable test base 【UK Note】 ･ This bundle’s goods value exceeds £135, so UK orders are acceptable under our policy. ･ Please email us before ordering (direct checkout may be restricted depending on the situation). 【Important Notes (Summary)】 ･ DC layouts only (no DCC electronics included) ･ Handcrafted items: minor variations may occur ･ Auto order email is in Japanese; we’ll send an English confirmation via Messages ･ Taxes/Duties: DAP (recipient pays import VAT/GST, duties, and carrier fees if any) ･ Shipping: Japan Post EMS (tracking & insurance), dispatch within 3 business days after payment is captured For full specifications and detailed notes, please see the individual turntable product page in our shop.

Bundle listing: To avoid duplicate shipping charges, we offer this set as a single listing. This bundle combines our ready-to-install manual turntable with our track laying gauge template set. It’s the fastest way to build a compact yard or engine shed area with clean, accurate track geometry, while avoiding duplicate shipping charges on the platform. 【What’s Included】 ･ Ready-to-install manual turntable set (assembled, painted, pre-wired, hand crank + polarity reversing switch) ･ Track laying gauge templates (curves + straights for 9mm gauge flex track) 【Best For】 ･ OO-9 / HOe / HOn30 / 009 compact layouts, micro yards, engine sheds, dioramas ･ Smooth turntable operation + consistent track spacing and curves 【Important Notes (Summary)】 ･ DC layouts only (no DCC electronics included) ･ Handcrafted items: minor variations may occur ･ Auto order email is in Japanese; we’ll send an English confirmation via Messages ･ Taxes/Duties: DAP (recipient pays import VAT/GST, duties, and carrier fees if any) ･ Shipping: Japan Post EMS (tracking & insurance), dispatch within 3 business days after payment is captured For full specifications and detailed notes, please see the individual product pages in our shop.

Bundle listing: To avoid duplicate shipping charges, we offer this set as a single listing. This bundle is designed to make compact layout curves clean, repeatable, and stable. Use the rail bender to create smooth curves with lasting rail memory, and the templates to fix track accurately with consistent geometry, while avoiding duplicate shipping charges on the platform. 【What’s Included】 ･ Professional rail bender (supports Code 40 to 148, tight radii down to approx. 30mm) ･ Track laying gauge templates (curves + straights for 9mm gauge) 【Best For】 ･ Tight-radius curves, micro ovals, compact dioramas, turnout work with flex track and drawn rail 【Important Notes (Summary)】 ･ Handcrafted/precision tools: minor cosmetic variations may occur ･ Auto order email is in Japanese; we’ll send an English confirmation via Messages ･ Taxes/Duties: DAP (recipient pays import VAT/GST, duties, and carrier fees if any) ･ Shipping: Japan Post EMS (tracking & insurance), dispatch within 3 business days after payment is captured For full specifications and detailed notes, please see the individual product pages in our shop.

Bundle listing: To avoid duplicate shipping charges, we offer this set as a single listing. A complete “track building + operation” bundle for compact 9mm gauge layouts. This set covers accurate track laying (templates), stable tight-radius curves (rail bender), and a ready-to-install manual turntable, while avoiding duplicate shipping charges on the platform. 【What’s Included】 ･ Ready-to-install manual turntable set (assembled, painted, pre-wired, hand crank + polarity reversing switch) ･ Track laying gauge templates (curves + straights for 9mm gauge) ･ Professional rail bender (supports Code 40 to 148, tight radii down to approx. 30mm) 【Best For】 ･ Micro ovals, tight-radius yards, handmade turnout projects, engine shed scenes 【UK Note】 ･ This bundle’s goods value exceeds £135, so UK orders are acceptable under our policy. ･ Please email us before ordering (direct checkout may be restricted depending on the situation). 【Important Notes (Summary)】 ･ DC layouts only (no DCC electronics included) ･ Handcrafted items: minor variations may occur ･ Auto order email is in Japanese; we’ll send an English confirmation via Messages ･ Taxes/Duties: DAP (recipient pays import VAT/GST, duties, and carrier fees if any) ･ Shipping: Japan Post EMS (tracking & insurance), dispatch within 3 business days after payment is captured For full specifications and detailed notes, please see the individual product pages in our shop.